Fluke Kohoutovice

Features of polycarbonate greenhouse Harvest PC

The thickness of this substance is 4 mm.

If you want, you can boost the duration of the structure to 6 yards or longer. To try it, it’s enough to join a two-meter extension. When picking a drawing, look closely at the distance between the arches gidpostroy.ru. This figure must be 65 cm, that’s the most appropriate duration for the specified thickness of the substance. The diameter of the doorways based on the manufacturer’s drawing is 90 cm.

Before assembling a polycarbonate greenhouse, it’s important to select a location because of the place. If that is done properly, you can provide yourself with a harvest of fresh veggies for the entire calendar year.

The place for your upcoming greenhouse is marked immediately in the planning of this garden plot. In order to melt the snow in the place of their greenhouse as early as possible, the ideal point on the site is going to be a small elevation. Additionally, in such a location is not going to need to be concerned about high humidity as dirt and air in the construction.

Build a polycarbonate greenhouse in an elevated site – intends to care for the best temperatures indoors.

If it is not feasible to place a greenhouse in an elevated position, you’ll have to pour a layer of fine crushed stone about 20 cm and the exact same layer of fertile land to make seedbeds.

Before assembling a greenhouse in your backyard plot, it’s also wise to think about where and how this structure is going to be set up. First, you have to pick a place for it. The greenhouse should be found at a metropolitan region at least a couple meters away from houses, barns and other structures.

How to Put in a greenhouse in Line with the Surfaces of the Planet

Make sure you measure the soil surface – it’s ideal to remove the surface. This will also get rid of weed seeds. And for simplicity of work, eliminate the soil in a place that’s around a meter wider on each side of the rectangle that you want.

In addition, it is worth considering having a foundation. As producers state, now most greenhouses do not need that, particularly if they (greenhouses) are utilized just in the spring and summer period. But, seasoned anglers still recommend making at least an elementary foundation from a bar. It’s very simple – it’s enough to connect with each other utilizing metal screws and corners four parts of wood using a cross-section of 10 * 10 cm. The size of such a base ought to be equal to the foundation of their future greenhouse.

Simple bar base

You may also create a strip base of concrete. He is more dependable than a bar base, but demands greater fiscal and labour expenses. Incidentally, the rainwater, that is utilised in winter, without it and do not do without it whatsoever.

Stages of the formation of a strip foundation: a schematic representation

Many manufacturers advise to install greenhouse structures without building a base. Even for this purpose, they equip the framework with specific T-shaped legs, so the construction was securely fixed. However, as practice shows, it’s still required to build a foundation: therefore and the foundation will be more securely fixed and the elements of the basis that are in touch with the soil, will be stored much longer in its initial state.

The main issue is to take care of the material with specific agents to protect the timber from moisture. The substance is generally installed on concrete blocks that are dug into the soil. To get a six-meter arrangement, they need 10 bits: four on each side and one at the center of the ends.

Before you do the greenhouse itself, you need to select the ideal place for this. It has to be an even site, so the framework was found equally, without distortions. It needs to be bright and never obscured by buildings or trees.